ITech IT7622 - Step:voltage:stop; Step:voltage:interval

System Commands
Copyright© Itech Electronic Co., Ltd. 65
Returns
<float>
STEP:VOLTage:STOP?
This command is used to query the end voltage value.
Command syntax
STEP:VOLTage:STOP?
Arguments
None
Returns
< float>
STEP:VOLTage:INTErval
This command is used to set the voltage step interval.
Command syntax
STEP:VOLTage:INTErval <float>
Arguments
<float> float number of voltage step
Query syntax
STEP:VOLTage:INTErval?
Returns
<float>
STEP:VOLTage:INTErval?
This command is used to query the voltage step interval.
Command syntax
STEP:VOLTage:INTErval?
Arguments
None
Returns
<float>