ITech IT7622 - Measure[:Scalar]:Power:pfactor; Measure[:Scalar]:Frequency; Measure[:Scalar]:Cfactor; Measure[:Scalar]:Current:peak:plus

System Commands
Copyright© Itech Electronic Co., Ltd. 30
Returns
<float>
MEASure[:SCALar]:POWer:PFACtor?
This command is used to read the A real-time power factors.
Command syntax
MEASure[:SCALar]:POWer:PFACtor? <A>
Arguments
<A>
Returns
< float >
MEASure[:SCALar]:FREQuency?
This command is used to read the A real-time frequencys.
Command syntax
MEASure[:SCALar]:FREQuency? <A>
Arguments
<A>
Returns
<float>
MEASure[:SCALar]:CFACtor?
This command is used to read the A real-time peak factors.
Command syntax
MEASure[:SCALar]:CFACtor? <A>
Arguments
<A>
Returns
< float >
MEASure[:SCALar]:CURRent:PEAK:PLUS?
This command is used to read the A real-time current readings at maximum
positive peak.