ITech IT7622 - List:name; List:recall; List:record:num

System Commands
Copyright© Itech Electronic Co., Ltd. 80
Arguments
None
Returns
<0|1>
LIST:NAME
This command is used to set the file name.
Command syntax
LIST:NAME <string>
Arguments
<string>
Query syntax
LIST:NAME?
Returns
<string>
LIST:RECall
This command is used to recall a list file.
Command syntax
LIST:RECall <string>
Arguments
<string>: LIST file name.
Returns
None
LIST:RECOrd:NUM
This command is used to set the LIST step number
Command syntax
LIST:RECOrd:NUM <value>
Arguments
<value>：Step number