ITech IT7622 - Fetch[:Scalar]:Power:pfactor; Fetch[:Scalar]:Frequency; Fetch[:Scalar]:Cfactor

System Commands
Copyright© Itech Electronic Co., Ltd. 27
Command syntax
FETCh[:SCALar]:POWer:APParent? <A>
Arguments
<A>
Returns
<float>
FETCh[:SCALar]:POWer:PFACtor?
This command is used to read the A power factors.
Command syntax
FETCh[:SCALar]:POWer:PFACtor? <A>
Arguments
<A>
Returns
<float>
FETCh[:SCALar]:FREQuency?
This command is used to read the A frequencys.
Command syntax
FETCh[:SCALar]:FREQuency? <A>
Arguments
<A>
Returns
<float>
FETCh[:SCALar]:CFACtor?
This command is used to read the A peak factors.
Command syntax
FETCh[:SCALar]:CFACtor? <A>
Arguments
<A>