ITech IT7622 - System:device:num; System:measure:mode

System Commands
Copyright© Itech Electronic Co., Ltd. 23
Arguments
RST|SAV0
Reset Value
None
Query syntax
SYSTem:POSetup?
SYSTem:DEVice:NUM
This command is used to set the number of device.
Command syntax
SYSTem:DEVice:NUM <value>
Arguments
<value>
Reset Value
None
Query syntax
SYSTem:DEVice:NUM?
Returns
<value>
SYSTem:MEASure:MODE
This command is used to set the measure mode.
Command syntax
SYSTem:MEASure:MODE
Arguments
<METer|SCOPe|HARMonic|VECTor>
Query syntax
SYSTem:MEASure:MODE?
Returns
<METer|SCOPe|HARMonic|VECTor>