ITech IT7622 - Measure[:Scalar]:Current:peak:minus; Measure[:Scalar]:Current:isurge; Fetch

System Commands
Copyright© Itech Electronic Co., Ltd. 31
Command syntax
MEASure[:SCALar]:CURRent:PEAK:PLUS? <A>
Arguments
<A>
Returns
< float >
MEASure[:SCALar]:CURRent:PEAK:MINUs?
This command is used to real-time measure the A maximum negative peak
current.
Command syntax
FETCh[:SCALar]:CURRent:PEAK:MINUs? <A>
Arguments
<A>
Returns
< float >
MEASure[:SCALar]:CURRent:ISURge?
This command is used to read the A real-time surge currents.
Command syntax
MEASure[:SCALar]:CURRent:ISURge? <A>
Arguments
<A>
Returns
<float>
FETCh?
This command is used to obtain all METER data of an item.
Command syntax
FETCh? <A>
Arguments
<A>