ITech IT7622 - System:communicate:lan:dhcp[:State]; System:communicate:lan:socketport

System Commands
Copyright© Itech Electronic Co., Ltd. 20
Command syntax
SYSTem:COMMunicate:LAN:CURRent:SMASk <string>
Arguments
<string>
Unit
None
Query syntax
SYSTem:COMMunicate:LAN:CURRent:SMASk?
Returns
<string>
SYSTem:COMMunicate:LAN:DHCP[:STATe]
This command is used to set Dynamic IP address of power supply.
Command syntax
SYSTem:COMMunicate:LAN:DHCP[:STATe] <0|1|0FF|ON>
Arguments
<0|1|0FF|ON>
Example
SYST:COMM:LAN:DHCP 1
Query syntax
SYSTem:COMMunicate:LAN:DHCP[:STATe]?
Returns
<0|1>
SYSTem:COMMunicate:LAN:SOCKetport
This command is used to set socket port of communication.
Command syntax
SYSTem:COMMunicate:LAN:SOCKetport <value>
Arguments
<value>