To Next Page

To Previous Page

Load Function

2. Press the composite keys [Shift]+[I-set] (Function) on the front panel to en-

ter the function menu.

3. Select 1. LIST: Off and press [Enter].

4. Press the Left/Right key to select Open and press [Enter].

5. Press the Left/Right key to select Internal and press [Enter].

6. Set the name of the List file to be recalled (that is, the file name set in Edit),

and press [Enter].

The interface returns to the main interface of the LIST function, which is dis-

played as follows:

FUNCTION LIST

Run Open Edit Export

7. Press the Left/Right key to select Export and press [Enter].

8. Press the Left/Right key to select Yes and press [Enter].

Indicates that the selected List file in Open is exported to the USB flash

drive.

Run the List Program

You can select a List file to execute according to your needs, so that the instru-

ment inputs the corresponding waveform sequence. Take the List file in Internal

as an example. The steps are as follows:

1. Press the composite keys [Shift]+[I-set] (Function) on the front panel to en-

ter the function menu.

2. Select 1. LIST: Off and press [Enter].

3. Press the Left/Right key to select Open and press [Enter].

4. Press the Left/Right key to select Internal and press [Enter].

5. Set the name of the List file to be recalled (that is, the file name set in Edit),

and press [Enter].

The interface returns to the main interface of the LIST function, which is dis-

played as follows:

FUNCTION LIST

Run Open Edit Export

6. Press the Left/Right key to select Run and press [Enter].

At this point, the interface returns to the main interface of the system and

Lxx/xxxx WTG is displayed in the lower right corner.

7. Turn on the [On/Off].

8. Based on the selected trigger method, perform the trigger operation.

Take the manual trigger as an example. Press [Shift]+[On/Off](Trigger) on

the front panel to run the selected List file. For details about the List trigger

method, see 5.8 Select Trigger Source (Trig Source).

ITech IT8000 Series User Manual

Other manuals for ITech IT8000 Series