ITech IT8900 Series - Chapter2 Quick Start; Brief Introduction

Quick Start
Copyright © ITECH Electronic Co., Ltd. 12
Chapter2 Quick Start
This Chapter will introduce power-on check steps of IT8900 Series to ensure
normal start-up and usage under initialization status of the load. Besides, to
facilitate usage, this part also displays the functions of front board, rear board
and keyboard keys as well as display functions of VFD (Vacuum Fluorescent
Display) to a quick view of load appearance, structure and key usage functions
before operation.
2.1 Brief Introduction
IT8900 Series is a single-input programmable DC electronic load. Built in with
RS232, USB, LAN, CAN and GPIB communication interfaces, this series of
programmable DC electronic load provides a multi-purpose solution to meet
different design and test requirements.
This Series delivers special functions and advantages at international level,
including:
 High-visibility vacuum fluorescent display (VFD)
 Voltage measurement dissolution rate: up to 1 mV Current 1 mA
 Voltage and current measurement speed: up to 500 KHz
 Support the master-slave connection, and all the single machine function is
reserved.
 Six operation modes: CC/CV/CR/CP/CV+CC/CR-LED.
 Adjustable CV loop speed, well-suited for multiple power supplies
 Transient over-power loading capability
 Measurement of voltage or current rise/fall time
 Overall modular design, convenient for maintenance and service
 Support the general protective function, including overvoltage protection
(OVP), overcurrent protection (OCP), overpower protection (OPP),
overtemperature protection (OTP) and input reverse polarity protection
(LRV/RRV).
 Rotary coding switch for easy and quick operation
 Remote sense test function
 Battery test function
 Auto test function
 OCP/OPP test function
 Memory capacity: 100 groups
 Short-circuit function
 Dynamic test function
 I-monitor function
 External analog quantity function
 Portable and robust enclosure equipped with skid resistant foot stand
 Intelligent fan control
 Built-in Buzzer, for warning
 Outage backup memory
 Provide power module self-inspection function
 Built-in USB, GPIB, LAN, CAN and RS232 communication interfaces
 Support the VISA, USBTMC and SCPI protocol.
Model
Voltage
Current
Power
Height
IT8912-600-480
600V
480A
12KW
15U
IT8912-1200-240
1200V
240A
12KW
15U
IT8915-150-960
150V
960A
15KW
15U