Quick Start
Copyright © ITECH Electronic Co., Ltd. 19
Schematic Diagram of Rear Panel of IT8900 series (37U*3) electronic load.
1. Slave load input terminals
2. Slave system bus terminals
3. Parallel input terminals, used to connect with slave load input terminals
4. Rear panel terminal
5. Parallel input terminals, used to connect with slave load input terminals
6. Parallel system Bus terminals, used to connect with slave system bus
terminals
7. Shield cover
8. Slave load input terminals
2.7 Power-on Selftest
A successful selftest indicates that the purchased load product meets delivery
standards and is available for normal usage. Before operation, please confirm
that you have fully understood the safety instructions.
To Next Page
Loading...
