11
Step 3:
Select the date format
Select the desired date format using the [Arrow up/down] buttons.
Confirm the entry with the green button. By pressing the [Continue] button, you will reach the next entry screen.
Step 4:
Enter the date
Set the date (day, month, year).
Confirm the entry with the green button. By pressing the [Continue] button, you will reach the next entry screen.
Step 5:
Enter the time
Set the time (hours, minutes, seconds).
Confirm the entry with the green button. By pressing the [Continue] button, you will reach the next entry screen.
The initial start-up and entry of the basic settings are now complete. The furnace will now automatically conduct a self test.
The performance of all furnace components is automatically checked.
2. Application
To Next Page
Loading...
