68
5. Safety Notes
Hazardous areas and safety equipment
Description of the hazardous areas of the furnace:
Hazardous area Type of risk
Firing chamber Burn hazard
Opening/closing mechanism Risk of crushing
Electrical components (cables and connections) Risk of electrical shock
Description of the safety equipment of the furnace:
Safety equipment Protective effect
Protective conductor Protection from electrical shock in case of a malfunction
Electrical fuses Protection from fire and destruction of the furnace
Furnace housing and end caps Protection from fire, electrical shock, burning and crushing
Do not block or touch movable parts. There is a risk of damaging the furnace or causing personal injury.
Safety information for the operation
The device may only be operated by authorized and trained technical personnel.
– Keep unauthorized persons, such as patients, children and animals, away from the device.
– In all cases of doubt regarding the safety of the device, switch off the device and take suitable measures to prevent
further use.
– Prior to connecting power or operation, check the device, the accessories and protective equipment for any damage.
– Do not use damaged, non-functioning equipment or accessories. Inform your authorized service partner.
– In order to ensure the product reliability and warranty services, the device must be exclusively operated with the original
accessories, in particular the original power adapter, from Ivoclar Vivadent.
– The user bears the risk when using non-approved accessories.
– To prevent damage to the device and a reduction of the device performance, observe the cleaning requirements and
cycles.
– Only operate the device unsupervised if the operating conditions for unsupervised operation described below are
fulfilled.
Unsupervised operation
The device may be operated unsupervised, provided the national and local laws and provisions allow for such action and
provided that they are observed. Furthermore, the requirements of the respective insurance company must be met
– Never use the device if the work environment is heavily soiled.
– Protect the device against unauthorized access.
Safety notes
This device has been designed according to EN 61010-1 and has been shipped from the manufacturer in excellent
condition as far as safety regulations are concerned. To maintain this condition and to ensure risk-free operation, the user
must observe the notes and warnings contained in these Operating Instructions.
– The user must especially become familiar with the warnings and operating conditions to prevent injury to personnel or
damage to materials. The manufacturer is not responsible for damage resulting from misuse or failure to observe the
Operating Instructions. Warranty claims cannot be accepted in such cases.
– Before switching on the furnace, make sure that the voltage indicated on the rating plate complies with your local
power supply.
– The mains socket must be equipped with a residual current operated device (FI).
– The power plug acts as a circuit breaker and may only be connected with an easy-to-access power socket with
protective contact.
– Use only the supplied power cord or a power cord with the same specifications.
– Place the furnace on a fire-proof table. Observe local regulations, (e.g. distance to combustible substances or objects,
etc.).
To Next Page
Loading...
