SeapiX – Operation Manual
SSD-C-1302 Ed. A – 01/2020 9
Manual Overview
This manual is the Operation Manual for SeapiX manufactured by iXblue. It must be read
and understood prior to using SeapiX. The manufacturer shall in no case be held liable for
any application or use that does not comply with the stipulations in this manual.
It is divided into several chapters:
• Part 1: Introduction
This part contains a general description of SeapiX and provides information about the theory
of operation.
• Part 2: Technical Characteristics
This part gives details on mechanical, acoustic and electrical characteristics of the SeapiX
components.
• Part 3: SeapiX Pack
This part details a typical SeapiX pack and its contents; it also gives some
recommendations.
• Part 4: SeapiX Installation Overview
This part provides an overview of SeapiX Installation – detailed seapiX installation being
described in SeapiX Installation Manual.
• Part 5: SeapiX Graphical User Interface (GUI)
This part describes SeapiX operation via its Graphical User Interface (GUI).
• Part 6: Preventive Maintenance
This part provides a table with SeapiX preventive maintenance tasks.
• Part 7: Troubleshooting
This part provides a table helping to solve minor problems encoutered while using SeapiX.
• Part 8: Support through TeamViewer
This part provides support contacting information through TeamViewer.
• Appendices
It contains some useful tips.
Warning: SeapiX is NOT a navigation tool. SeapiX is a fishing tool and it must be used as
such.
The abbreviations and acronyms used in this manual are listed hereafter.
To Next Page
Loading...
