CONTROLS 4
en-40
4.2.23.40 CRUISE SELECT _______________________________________________________
Select between “mow mode, not enabled”, “mow and transport mode” or
“transport mode” use button up and down to move between them.
Press the button .to accept
Press the button to return to previous menu.
4.2.23.41 CROSS CUT ___________________________________________________________
Select the cross cut and accept .
4.2.23.42 CROSS CUT ACTIVE / INACTIVE __________________________________________
Use the button up and down to move between cross cut active and not
active.
Press the button .to accept.
Press the button to return to previous menu
Cruise Menu
Mow Mode
Not Enabled
Pin Menu
Cruise Control
Cross Cut
Vehicle Speed
Change PIN
Inclinometer
Set Default Parameters
Drive Modes
Fan Drive
Cross Cut
Cross Cut active
To Next Page