4 CONTROLS
en-41
4.2.23.43 VEHICLE SPEED _______________________________________________________
Select the vehicle speed and accept .
4.2.23.44 MAXIMUM SPEED SETTINGS MENU ______________________________________
Use the button up and down to move
between transport and mow speed and creep
speed.
Press the button .to accept.
Select which transport and mow speeds are
needed in forward and reverse
Use the button up and down to move to
the needed speed.
Press the button .Too save.
Press the button to return to previous menu
Do the procedure for creep mode.
4.2.23.45 PIN CHANGE __________________________________________________________
Select the PIN change and accept .
Press the button up and down to move
forward the numbers.
Select . To accept.
Pin Menu
Cruise Control
Cross Cut
Vehicle Speed
Change PIN
Inclinometer
Set Default Parameters
Drive Modes
Fan Drive
Max Speed Settings Menu
Transport and Mow Speed
Creep Speed
Max Speed Menu
Transport
FW 24 mph
RVS 8 mph
Mow FW 11 mph
RVS 8 mph
Pin Menu
Cruise Control
Cross Cut
Vehicle Speed
Change PIN
Inclinometer
Set Default Parameters
Drive Modes
Fan Drive
Change PIN
New PIN
0
To Next Page
Loading...
Need help?
General
