Barcode Scanning XT200 User Manual
Janam Technologies LLC Version 2, April 2020 Barcode Scanning 9—1
Barcode Scanning
9
Using the Imager
Janam's XT200 is available with an integrated
1D/2D barcode scanner to eliminate the chal-
lenges often associated with camera scanners
or bulky sled attachments.
Scanning with the XT200
The XT200 integrated barcode scan window is
located on the top edge of the device.
When triggered via onscreen control or one
of the two scan buttons highlighted in orange
in the picture to the right, the barcode scanner
illuminates the area and projects a rectangular
red lighted area that serves as a confirmation of
scan triggering and as a general targeting guide.
A bright, red aiming dot enables users to easily
select a single barcode to capture in a field of
barcodes.
CAUTION!
Never stare directly
into the barcode scan
beam emitted from
the barcode imager
window!
Never point the
barcode beam emitted from the barcode
imager window into the sightline of others!
Damage to eyesight can result as a result of
failure to adhere to these precautions.
To Next Page
Loading...
