Barcode Scanning XT200 User Manual
Janam Technologies LLC Version 2, April 2020 Barcode Scanning 9—6
Scan Wedge App
The XT200 also comes preloaded with the
Scan Wedge application. When active, Scan Wedge runs
in the background and can send scanned and decoded data directly into the currently active
foreground application. For example, with Scan Wedge active, the XT200 can be used to scan barcode
data directly into a Microsoft Word or Excel template, or any other app that accepts input data.
To activate Scan Wedge, go to Scan Settings and toggle the on/off switch to on. Under Basic you
can enable Auto Scan, set the Auto Scan Interval in intervals between 0.25 and 10 seconds, or
enable Continuous Scan. Under Wedge you can specify transmitting a barcode ID, an AIM ID,
as well as a Group Separator, a Prefix, a Suffix, and a Terminator. These can be used to add
some formatting to the scans, or bring them into a format suitable for subsequent processing. You
can also toggle Transmit Barcode ID on and off, and specify a Group Separator.
Enable extended wedge allows creating and applying scan styles that can include actions and
conditions. Contact your Janam representative for more information.
To the right is an example of adding a prefix
(“Scan result:”) in Scan Wedge, and then scan
barcode data directly into the Notes application.
Scan data can be captured into any app that
accepts text input, including Word or Excel
files.
To Next Page
Loading...
