Janome MyLock 744D - Threading the Needle on the Right

• Threading the Needle on the Right
Place the spool of thread on the spool pin second from
q
the left.
* The points to thread for needle on the right are
marked in blue.
* A convenient threading chart is placed on the
machine body inside the looper cover.
w
y
e
u
r
t
i
o
0
q
1. Draw the thread through the thread guide second
from the left from back to front: A
q Thread guide
1
(A) (B)
2. Pass the thread through the holes in the second
w
row from the left of thread guide plate as
illustrated.
w Thread guide plate
2
3. Hold the thread at both ends and tug gently to
ensure the thread is correctly inserted between
the tension discs. (If the presser foot lifter is
raised, the thread easily inserts between the
tension discs.)
e
e Right needle thread tension dial
3
48