Janome MyLock 744D - Page 65

Looper thread tension is out of balance (1)
The illustration shows sewing results when the lower
q
looper thread tension is too tight and/or upper looper
thread tension is too loose.
y
Remedy:
Loosen lower looper thread tension and/or tighten
r
3
4
upper looper thread tension.
w t
q Wrong side of fabric
w Right side of fabric
e Right needle thread
e
r Left needle thread
t Upper looper thread
y Lower looper thread
3 Upper looper thread tension dial
4 Lower looper thread tension dial
q
r
3
4
w
t
e
Looper thread tension is out of balance (2)
The illustration shows sewing results when the upper
looper thread tension is too tight and/or lower looper
thread tension is too loose.
Remedy:
Loosen upper looper thread tension and/or tighten
lower looper thread tension.
3 Upper looper thread tension dial
4 Lower looper thread tension dial
y
62