EasyManua.ls Logo

Janome MyLock 744D - Needle;Lower looper thread tension is out of balance (2); Remedy:; Correct Tension for Rolled Hem

Janome MyLock 744D
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
q
e
r
o
0
1
w
q
e
r
w
Needle/Lower looper thread tension is out of
balance (2)
The illustration shows sewing results when the
needle thread tension is too tight and/or lower looper
thread tension is too loose.
Remedy:
Loosen needle thread tension and/or tighten lower
looper thread tension.
o
Left needle thread tension dial
0
Right needle thread tension dial
1
Lower looper thread tension dial
Correct tension for rolled hem
* The illustration shows sewing result with correct
tension settings.
Set the changeable thread guide at the lowered
position.
Other settings are same as the 3-threads rolled hem
(See page 76).
However, tension adjustment may be required de-
pending on the type and thickness of fabric and
threads being used.
Make a trial sewing with the fabric and threads you
wish to use to obtain in the best results by adjusting
tension.
q
Wrong side of fabric
w
Right side of fabric
e
Needle thread
r
Lower looper thread
72

Table of Contents

Related product manuals