NT-2000 REF Manual
User–made Settings
12-1
12. User Settings To Be Stored in Non–Volatile Memory
The following user–made settings will be stored in the non–volatile memory.
● Screen Brightness Level: Last used level
● Keypad Dimmer Level: Last used level
● *
1
Settings via Menu System
・ Background Color: WHITE, BLACK, BLUE
・ Message Font Type: NORMAL, BOLD
・ Screen Sleep Mode
- On/Off Status: ON, OFF
- On/Off Time Period: STANDARD, USER–DEFINED MODE
・
*
2
Second Receiver Frequency: 490 KHZ, 4209.5 KHZ
・ Keypress Beep: ON, OFF
・
*
3
Station Selection/Rejection
- First Receiver:
Selected Stations: A to Z
(all stations)
Rejected Stations: None
- Second Receiver:
Selected Stations: A to Z ( all stations)
Rejected Stations: None
・ *
3
Message Type Selection/Rejection
- First Receiver:
Selected Types: A, B, C, D, E, F, H, J, K, L , V , Z
Rejected Types: G, I, M, N, O, P, Q, R, S, T, U, W, X, Y
- Second Receiver:
Selected Types: A, B, C, D, E, F, H, J, K, L , V , Z
Rejected Types: G, I, M, N, O, P,
Q, R, S, T, U, W, X, Y
・ Output Port Settings (
On/Off, Protocol, Bit Format, Baud Rate):
- RS–232C:
ON, NONE, 8 DATA BITS, 1 STOP BIT, ODD, 0.11
- RS–422:
ON, IEC61162, 8 DATA BITS, 1 STOP BIT, ODD, 4.8
- I/O DATA:
ON, NONE, 8 DATA BITS, 1 STOP BIT, ODD, 4.8
･ Message Output (
for printing live messages on–line)
- RECEIVING MSG: ON, OFF
・
*
4
Message Alarms On/Off
- Type A Message: ON, OFF
- Type B Message: ON, OFF
- Type L Message: ON, OFF
*
1
:
Settings indicated in Italic type fonts are factory defaults.
*
2
:
Can be controlled via RS–422 port with IEC 61162–1 proprietary command. Last
setting is stored in memory.
*
3
:
Can be controlled via RS–422 port with IEC 61162–1 $CRNRM command. Last settings
are stored in memory. Message types A, B, D and L cannot be rejected.
*
4
:
Type D message alarm is always set to ON; the user canot change the status.
To Next Page
Loading...