JMC NT–2000 - Proprietary Sentences

NT-2000 REF Manual
Installation
7-18
7.4.5. Proprietary Sentences
The following commands (IEC 611 62– 1proprietary format sentence) are supported to
externally switch the second receiver frequency:
$PJMCR
,
0
,
1
*
hh <CR> <LF>
① ② ③
① Receiver index:
0 = Second receiver
1 to 9 = Reserved
② Receive frequency index:
1 = 490 kHz
2 = 4209.5 kHz
③ Checksum
See the examples below.
Examples:
･ Switching to 490 kHz: $PJMCR
,
0
,
1
*
47<CR><LF>
･ Switching to 4209.5 kHz: $PJMCR
,
0
,
3
*
45<CR><LF>