NT–2000 REF Manual
Customizing Operation via Menu System
4-9
4.8.2. Selecting and Rejecting Message Types –
2/2
(3) –
2/2
The status of a rejected message type is indicated in red.
Types A, B, D and L, however, cannot be rejected due to the relevant IMO
resolutions and IEC specifications.
Using
/
/
/
, select the message type you wish to reject, and then
press
. There is no need to press
after making each setting.
Figure 4-16 Rejecting Message Types – Step 2
(4) Repeat step (3) to select other message types you wish to reject.
(5) Press
to return to the previous menu (for selection/rejection settings of
transmitters) or
to return to the first receiver message page.
To Select Rejected Message Type Again
To select a message type you rejected previously, press
instead of
after
selecting that station at step (3).
2: MESSAGES
A: NAVIGATIONAL WARNING SELECTED
B: METEOROLOGICAL WARNING SELECTED
C: ICE REPORT SELECTED
D: SEARCH AND RESCUE INFORMA– SELECTED
TION/PIRACY & ARMED ROBBERY SELECTED
E: METEOROLOGICAL FORECAST SELECTED
F: PILOT SERVICE MESSAGE REJECTED
G: AIS REJECTED
H: LORAN–C MESSAGE SELECTED
I: PRESENTLY NOT USED REJECTED
J: SATNAV MESSAGE SELECTED
K: OTHER ELECTRONIC NAVAID MSG. SELECTED
L: ADDITIONAL NAV. WARNING SELECTED
To reject message type F, press
.
To Next Page
Loading...