JMC NT–2000 - Recommended Spare Parts

NT-2000 REF Manual
User-Level Maintenance
6-3
6.5. Recommended Spare Parts
A list of the spare parts recommended for the maintenance and servicing for three to
five years is given below. Replacing parts, except for the active antenna unit, should be
done by your dealer or a qualified service engineer. The user should not open the
receiver cabinet for inspection or replacing suspected parts.
Table 6-1 Recommended Spare Parts
Table 6-2 Other Parts Available As Replacements
Part Name Part Number Quantity
Fuse 3A/5.2X20mm 10
Plugs:
Coaxial Cable Plug (Antenna Plug) BNC–58/U 2
Power Cable Plug 14P–3F 1
*
1
I/O DATA Plug FM14–8P 1
*
2
RS–422/232C Plug HDEB–9S 1
*
3
Coaxial Cable Plug (Extension) PL–259 1
A
ctive Antenna Unit:
*
4
Preamplifier Unit ANT–2000–3F 2
*
4
Whip Element (1.2m) 410298B 1
Printed Circuit Boards (PCBs):
First Receiver PCB NT–2000–A 1
*
5
Second Receiver PCB NT–2000–B 1
*
6
Frequency Converter PCB N501–F/C–A 1
Power Supply PCB N501–PWR–A 1
FL Inverter PCB CXA–L0621A 1
Key PCB SF–KB02 1
*
1
Not needed unless the I /O DATA port is used for your applications.
*
2
Not needed unless RS–232C/RS–422 port is used for your applications.
*
3
Dealer –s upplied. Not needed unless the cable is extended with a PL–258 connector .
*
4
Not needed if your installation uses a long wire antenna.
*
5
Not needed unless second receiver 490 kHz is used in regular operation.
*
6
Not needed unless second receiver 4209.5 kHz is used in regular operation.
Part Name Part Number
CPU PCB N501–CPU–A
TFT LCD Module (LCD display panel) LQ080V3DG01