53
0X001059 C1 USER CAL TOOL LOW
Perform the User calibration.
If the problem still persists:
Check the User Calibration weight.
If the problem still persists:
Check the transducers wiring
If the problem still persists:
Check the transducers.
If the problem still persists:
Check the IBP box.
If the problem still persists:
Call Snap On
C Codes C66, C75, C103, C104, C115, C84, C88
0X001060 C2 USER CAL TOOL LOW
Perform the User calibration.
If the problem still persists:
Check the User Calibration weight.
If the problem still persists:
Check the transducers wiring
If the problem still persists:
Check the transducers.
If the problem still persists:
Check the IBP box.
If the problem still persists:
Call Snap On
C Codes C66, C75, C103, C104, C115, C84, C88
0X001061 CAL WEIGHT NOT AT 12 O’CLOCK IN STEP 2 OF C115
Perform the calibration C115 with weight in the correct side.
If the problem still persists:
Call Snap On
C Codes C115, C84, C88
0X001080 SPINUP TIMEOUT
Check the belt adjustment.
If the problem still persists:
Check the belt.
If the problem still persists:
Check the brake adjustment.
If the problem still persists:
Check the motor connector and cable
If the problem still persists:
Check the motor pulley.
If the problem still persists:
Check the main shaft Optoencoder ! at cable
If the problem still persists:
Check the motor.
If the problem still persists:
Check the main shaft Optoencoder.
If the problem still persists:
Check the IBP box
If the problem still persists:
Call Snap On
C Codes C60, C74, C54, C115, C84, C88
To Next Page
Loading...