JPS ACU-5000 - Page 15

ACU-5000 Operations Manual
Interoperability Now 1-7
Table 1-3 Equipment and Accessories Supplied Rack Mount Version
ACU-5000 Shipping Level - P/N 5110-800000 (4 channel) to 5110-800012 (12 channel)
Quantity
Item
JPS P/N
1
ACU-5000 Final Assembly (main box only – rack mount 4 channels)
5110-800000
ACU-5000 Final Assembly (main box only – rack mount 5 channels)
5110-800005
ACU-5000 Final Assembly (main box only – rack mount 6 channels)
5110-800006
Continue numbering up to 12 channels:
ACU-5000 Final Assembly (main box only – rack mount 12 channels)
5110-800012
The above refers to initial factory order.
To increase channels in the field after initial order -
purchase the following; qty determines number of additional channels:
1
ACU-5000, additional channel
5100-112000
1
Accessory Kit
5100-100150
Kit consists of:
Qty Part Number Description
1 1620-240060 12 VDC Power Supply [100 to 240 VAC, 50/60 Hz]
1 0313-037770 Power Cable
1 0510-200000 Handset with PTT Switch and coiled cord
Note:
When ordering a unit from the factory, use the 5110-8000xx number. This
calls for the ACU-5000 rack mount unit, plus the accessory kit which has
the power supply, handset, and the cables associated with each.
To order that additional channels be added to an already purchased unit,
use the 5100-112000 part number. Order as many of this part number as
needed; for example, to raise an eight channel version to ten channels,
order quantity 2 of 5100-112000. See Section 4.2.6 for further information.