ACU-5000 Operations Manual
Interoperability Now 5-9
5.7 Channel Configuration - SIP
Any of the ACU-5000’s channels 1 through twelve can be configured to the SIP channel type.
The hardware interface for any and all of the SIP channels is any of the ACU-5000 RJ-45 LAN
connectors.
The SIP channel type configuration page contains a large number of SIP-specific configuration
options as can be seen in the figure below (Basic and Current Status settings areas not shown).
As always, context-sensitive help information is available to assist proper SIP channel
configuration.
To Next Page
Loading...
