JPS ACU-5000 - Equipment and Accessories Supplied

ACU-5000 Operations Manual
1-6 Interoperability Now
1.14 Equipment and Accessories Supplied
Table 1-2 Equipment and Accessories Supplied - Tabletop Version
ACU-5000 Shipping Level - P/N 5100-100000 (4 channel) to 5100-100012 (12 channel)
Quantity
Item
JPS P/N
1
ACU-5000 Final Assembly (main box only – tabletop 4 channels)
5100-100000
ACU-5000 Final Assembly (main box only – tabletop 5 channels)
5100-100005
ACU-5000 Final Assembly (main box only – tabletop 6 channels)
5100-100006
Continue numbering up to 12 channels:
ACU-5000 Final Assembly (main box only – tabletop 12 channels)
5100-100012
The above refers to initial factory order.
To increase channels in the field after initial order -
purchase the following; qty determines number of additional channels:
1
ACU-5000, additional channel
5100-112000
1
Accessory Kit
5100-100150
Kit consists of:
Qty Part Number Description
1 1620-240060 12 VDC Power Supply [100 to 240 VAC, 50/60 Hz]
1 0313-037770 Power Cable
1 0510-200000 Handset with PTT Switch and coiled cord
Note:
When ordering a unit from the factory, use the 5100-1000xx number. This
calls for the ACU-5000 tabletop unit, plus the accessory kit which has the
power supply, handset, and the cables associated with each.
To order that additional channels be added to an already purchased unit,
use the 5100-112000 part number. Order as many of this part number as
needed; for example, to raise an eight channel version to ten channels,
order quantity 2 of 5100-112000. See Section 4.2.6 for further information.