ACU-5000 Operations Manual
4-6 Interoperability Now
Initial roles and associated permission sets:
Super User (access to all system capabilities)
o Control Nets
o Change Channel Configurations
o Change Basic System Settings
o Apply/Update System Software
o Configure Users and Roles
o Create/Update Channel Profiles
System Admin
o Control Nets
o Change Channel Configurations
o Change Basic System Settings
Access to these System Settings Pages:
o Network Configuration
o Expanded System Configuration
o Restore System Defaults
o Shutdown System
No access to these System pages:
o User Management
o Software Update
o PIN Management
o License Update
o Create/Update Channel Profiles
Net and Channel Controller
o Control Nets
o Change Channel Configurations
No access to any System pages
Net Only Controller
o Control Nets
Access to only the Net Control page
4.2.4 PIN Management
If the system is set up to allow it, external radio or SIP users may use DTMF to control some
aspects of the system (see Section 8.2 for more information). PINs are an optional security feature
to that proves a level of security to limit who may control the system and what level of control is
To Next Page
Loading...
