5
Double Sided Servo
Mounting Tape
Threadlock
(Blue and Red Required)
Nylon Wire Ties To
Secure Radio Wires
Heavy-Duty Servo
Arms (3)
Silicone Fuel Tubing
Whip Antenna
Fuel Filter
Glow Plugs
2. ENGINE REQUIREMENTS (NOT INCLUDED):
3. BUILDING SUPPLIES (NOT INCLUDED):
The following items are needed to complete the assembly of the JR Ergo:
A .32–.38 R/C helicopter engine (Ergo .30) or .46–.48 R/C helicopter engine (Ergo .46)
A special helicopter type muffler is also required
(MDS .38 Heli Engine Shown)
(MDS .48 Heli Engine Shown)
(JRP960078 Ergo .32–.36 Muffler Shown)
(JRP960079 Ergo .46 Muffler Shown)
To Next Page
