To Next Page

To Previous Page

START SHAFT/CLUTCH/ENGINE ASSEMBLY PARTS LIST

PART # DESCRIPTION QUANTITY COMMENTS /ADDITIONAL CONTENTS

JRP960005 Starter Hex Adapter 1 1 - 4x4mm Set Screw

JRP981025 Bearing, Sealed, 5x19x6mm 1

JRP980013 Socket Head Bolts, 3x8mm 10

JRP980036 Plate Washers, 3mm 10

JRP980004 Set Screws, 4x4mm 10

JRP960157 Start Shaft Bearing Block 1

JRP981005 Bearing, 1910ZZ 1

JRP960004 Clutch Bell Assembly 1 Complete w/ Pinion Guard Lining

JRP970007 Clutch Lining 1

JRP960006 Start Shaft Assembly 1

JRP980012 Socket Head Bolts, 3x6mm 10

JRP960007 Front Tail Belt Pulley 1 1 - 3x6mm Socket Head Bolt

JRP981006 Bearing, 1960ZZ 1

JRP980018 Tail Drive Pin BB Block 1

JRP970009 Tail Drive Pinion w/ Shaft 1 1 - 3x6mm Socket Head Bolt

1 - 3mm Flat Washer

JRP980011 Socket Head Bolts, 3x5mm 10

JRP960011 Cooling Fan Blades: 32-36 1 4 - 3x5mm Socket Head Bolts

JRP960019 Fan Hub: 32-36 1

JRP980094 Clutch Bolt 10

JRP960040 Aluminum Fan Assembly: 46 1

JRP970004 Universal Ball Link 10

JRP980047 Control Rod, 2.3x75mm 1

JRP970083 Pressure Tap 1

JRP970001 Joint Balls w/2x8mm Screws 10

JRP980037 Hex Nuts, 2mm 10

JRP980014 Socket Head Bolts. 3x10mm 10

JRP96008 Engine Mount: 32-36 1 4 - 3x5mm Socket Head Bolts

JRP960039 Engine Mount: 46 1

JRP980021 Socket Head Bolts, 3x30mm 10

JRP980033 Spring Washers, 3mm 10

JRP980016 Socket Head Bolts, 3x15mm 10

JRP960078 Muffler, .36-.36 1

JR ERGO User Manual

Questions and Answers: