ON
㩷䌒䌅䌌䌁䌙 MODE
CONTINUOUS
㩷 DEPTH ALARM >
㩷 SYSTEM ALARM >
A present selection item is displayed by a yellow character.
Selecting items move a yellow display with or key.
When or the [ENT] key is pressed after a necessary item is selected, the item setting content is
displayed.
When the [ENT] key is pressed after the content is selected (setting), the selection (setting) is registered
and it returns to above screen.
When returning to above screen without registering, press or the [CLR] key.
Setting Buzzer Key
Make KEY ACK a yellow display, press or the [ENT] key, and select it from the following, set content.
Set content 㧦 ON/OFF
ON
㧦 When the key on the operation panel is pressed, it sounds a buzzer.
OFF 㧦 When the key on the operation panel is pressed, it doesn't sound a buzzer.
Select the method by and press the [ENT] key.
Setting Relay
٧The kind of the relay contact output is selected.
Make RELAY MODE a yellow display, press or the [ENT] key, and select it from the following, set
content.
Set content 㧦CONTINUOUS/INTERMITTENT
CONTINUOUS
㧦 When it is a depth alarm and a system alarm, the relay contact is
continuously output.
INTERMITTENT 㧦 When it is a depth alarm and a system alarm, the relay contact is intermittent
output.
Select the method by and press the [ENT] key.
A left, set content is an initial value.
To Next Page
Loading...
