JRC JFE-380 - Initial Setting; Setting Memory Length; Setting Display Color of Day;Night

4. Operation 25
4.5 Initial Setting
The following menu is displayed with [MENU]࡮INITIAL .
INITIAL
㩷 MEMORY LENGTH 24hr
㩷 COLOR
䋾
㩷 DEPTH DISPLAY MODE TRAN
㩷 PRIMARY
䋾
㩷 SECONDARY
䋾
㩷 DATE/TIME
䋾
࡮A present selection item is displayed by a yellow character.
࡮Selecting items move a yellow display with or key.
࡮When or the [ENT] key is pressed after a necessary item is selected, the item setting content is
displayed.
࡮When the [ENT] key is pressed after the content is selected (setting), the selection (setting) is registered
and it returns to above screen.
࡮When returning to above screen without registering, press or the [CLR] key.
Setting Memory length  
٧The memory length of the sounding data displayed in the history mode is set.
࡮Make MEMORY LENGTH a yellow display, press or the [ENT] key, and select it from the following,
set content.
Set content 㧦12hr/24hr
12hr 㧦The memorizing length is set to 12 hours. (Memorizing interval is 30 seconds.)
24hr
㧦The memorizing length is set to 24 hours. (Memorizing interval is 1 minute.)
࡮Select the length by and press the [ENT] key.
Setting Display Color of Day/Night
٧When switching with the [DAY/NIGHT] key, the image color and the character color are set.
࡮Make COLOR a yellow display, press or the [ENT] key, and the menu under the left is displayed.
COLOR DAY1
㩷 DAY1
䋾
㩷 SCREEN
2
㩷 DAY2
䋾
㩷
CHARACTER 1
㩷 NIGHT1
䋾
㩷 NIGHT2
䋾
࡮After the item is selected with or key,
when key is pressed, a right menu i
s
displayed.
࡮As for a set menu of DAY1㨪NIGHT2, the
same content is displayed.
A left, set content is an initial value.