4. Operation
4-19
COPY： A present screen display is printed. The direction of paper feed is length against the screen.
HISTORY：All the memorized depth data is graphically printed. The direction of paper feed is time.
Secondary data is printed following primary in display screen for dual frequency.
On single frequency mode, only displaying frequency data is printed.
After the graphical printout, the data of START information and END information is printed.
The information data is same one as time cursor display information.
When the history is long, it takes time to print the entire history.
LOG： This printout is available only the history display mode. On history display mode, move time
cursor by
or key to select the center of LOG printout. LOG graphical printout length
is set by “PRINT LENGTH(LOG)” menu.(10min/ 20min/ 30min/ 1hr/ 2hr)
A time cursor is displayed in the graphical printout. The direction of paper feed is time.
After the graphical printout, the data of START information, CURSOR information and END
information is printed. Each information data is same one as time cursor display information.
Print out examples
1. COPY print mode
STANDARD HISTORY DOCKING
Single frequency Single frequency Dual frequency
To Next Page
Loading...
Need help?
General
