JRC JFE-700 - Checking System Version; Initializing Menu Settings

4. Operation
4-22
4.7 Checking system version
◎ Internal software version and DSP version are displayed.
4.8 Initializing menu settings
◎Initialize user settings.
MENU MENU 1 MENU 2 Return value
DISPLAY
SCROLL SPEED
STD
NOISE REJECT
4
INTERFERENCE
IR1
CURSOR
AUTO
BOTTOM LINE
OFF
DEPTH DISPLAY MODE
XDC
R
DAY/NIGHT
DAY DUSK NIGHT
LAT/LON
OFF
DEPTH ALERT SET DEPTH
0.0
INITIAL
COLOR
DAY
7color + BLAC
K
DUSK
7color + BLAC
K
NIGHT
7color + BLAC
K
DATE TIME
DIFF
±00:00
FORMAT
YY
-
MM
-
DD
12/24h
12hr 24h
r
GPS SYNC
ON
SET
PRINT
PRINT MODE
COPY
PRINT CYCLE (LOG)
OFF
PRINT LENGTH (LOG)
10min
・ Touch and the software and DSP version will be displayed.
・ After confirming, touch
.
・ Touch
and the confirmation screen will be displayed.
・ Touch
to start initialization.
・ To return to the previous screen without initializing, touch
.
・ By initialization, RANGE, GAIN, and DRAFT will be as follows
RANGE = AUTO
GAIN = AUTO
DRAFT = 0.0
In addition, the values returned by the settings in MENU are as shown in the
table below.