4. Operation
4-17
GPS SYNC (GPS synchronization)
Touch Panel Calibration
◎Touch position correction
・ Touch the settings will be displayed.
Set content：OFF/ON
OFF：An internal clock is used.
ON：Uses time information from GPS. Also, when the internal clock of
the processing unit deviates by 30 seconds or more, the internal
clock is corrected to the time information from GPS.
・ Change the settings with
, .
・ After setting, touch
.
When the touch position and the reaction position are out of alignment, it can be
corrected by performing calibration.
・ Touch
and the calibration screen will be displayed.
・ Touch
, which turns red in the order of upper left → upper right
lower left → lower right → center of the screen. The position is corrected.
To Next Page
Loading...
