JRC JHS-32B - Page 106

98
OPERATION
4.3 Communicating in DSC (Digital Selective Call) Mode
TIP
Up to 10 messages can be stored.
Review messages as follows:
• Each time is pressed, the displayed
message cycles one step backwards in time
from the newest message, stopping when the
oldest message is reached:
No. 01 ➞ No. 02 ➞ • • • ➞ oldest message
• Each time
is pressed, the displayed
message cycles one step forwards in time from
the oldest message, stopping when the newest
message is reached:
Oldest message No. ➞ • • • ➞ No. 01
Press
CALL
.
• The OTHERS ACKNOWLEDGEMENT CALL
Display appears and the message is transmit-
ted.
• When the message has been transmitted,
TRANSMITTED appears.
Press
STOP
to return to the DSC
MENU Display.
The OTHERS ACKNOWLEDGEMENT CALL
Display disappears and the DSC MENU Display
appears.
Press
STOP
to return to the CH16
Status Display.
The CH16 Status Display returns.
TIP
For any controller which does not have priority,
press
OPE
on the controller currently in use to
change OPE to OFF.
--OTHERS ACKNOWLEDGEMENT CALL--
CH70 25W
FORMAT :INDIVIDUAL
ADDRESS :123456789
CATEGORY :ROUTINE
TELECOMMAND1 :G3E SIMP TEL
TELECOMMAND2 :NO INFORMATION
WORK CH :NONE
END OF SEQUENCE:ACK BQ
CALL CH :70
TRANSMITTED
PRESS TO EDIT.
PRESS CALL TO SEND.
PRESS STOP TO RETURN.
--DSC MENU--
CH70 25W
1.DISTRESS CALL EDIT
2.ALL SHIPS CALL EDIT
3.INDIVIDUAL CALL EDIT
4.AUTO/SEMI-AUTO TEL CALL EDIT
5.DISTRESS RELAY
6.DISTRESS ACKNOWLEDGEMENT
7.OTHERS ACKNOWLEDGEMENT
8.RECEIVED DISTRESS MESSAGE READOUT
9.RECEIVED OTHERS MESSAGE READOUT
SELECT WITH , & PRESS ENTER .
PRESS STOP TO RETURN.
ITU CH 16
MODE: SIMP TEL OUTPUT: 25W
OPE : MASTER ALARM : ENABLE
SCAN: OFF SQL : CLOSE
SP : ON POWER : AC
21 JUL 1994 14:59 UTC
U
ITU CH 16
MODE: SIMP TEL OUTPUT: 25W
OPE : MASTER ALARM : ENABLE
SCAN: OFF SQL : CLOSE
SP : ON POWER : AC
21 JUL 1994 14:59 UTC
S: 12°34’ W: 123°45’ U