JRC JHS-32B - Acknowledging a Call with Request Concerning New Work Channel

86
OPERATION
4.3 Communicating in DSC (Digital Selective Call) Mode
4.3.10
Use this feature to reply to a call back request specifying another channel and the communication
type.
OPERATION
Press
MENU
.
The DSC MENU Display appears.
Select “3. INDIVIDUAL CALL
EDIT” using
/
.
“3. INDIVIDUAL CALL EDIT” is highlighted.
Press
ENTER
.
The INDIVIDUAL CALL EDIT Display appears
and ADDRESS is highlighted.
TIP
FORMAT is fixed as INDIVIDUAL and cannot be
edited.
Enter the ID number of the desti-
nation and press
ENTER
.
CATEGORY is highlighted.
TIP
Refer to step 10 of “4.3.7 Relaying a Distress
Call” for information on entering an ID number.
Acknowledging a Call With Request
Concerning New Work Channel
--DSC MENU--
CH70 25W
1.DISTRESS CALL EDIT
2.ALL SHIPS CALL EDIT
3.INDIVIDUAL CALL EDIT
4.AUTO/SEMI-AUTO TEL CALL EDIT
5.DISTRESS RELAY
6.DISTRESS ACKNOWLEDGEMENT
7.OTHERS ACKNOWLEDGEMENT
8.RECEIVED DISTRESS MESSAGE READOUT
9.RECEIVED OTHERS MESSAGE READOUT
SELECT WITH , & PRESS ENTER .
PRESS STOP TO RETURN.
--DSC MENU--
CH70 25W
1.DISTRESS CALL EDIT
2.ALL SHIPS CALL EDIT
3.INDIVIDUAL CALL EDIT
4.AUTO/SEMI-AUTO TEL CALL EDIT
5.DISTRESS RELAY
6.DISTRESS ACKNOWLEDGEMENT
7.OTHERS ACKNOWLEDGEMENT
8.RECEIVED DISTRESS MESSAGE READOUT
9.RECEIVED OTHERS MESSAGE READOUT
SELECT WITH , & PRESS ENTER .
PRESS STOP TO RETURN.
--INDIVIDUAL CALL EDIT--
CH70 25W
FORMAT :INDIVIDUAL
ADDRESS :000000000
CATEGORY :ROUTINE
TELECOMMAND1 :G3E SIMP TEL
TELECOMMAND2 :NO INFORMATION
WORK CH :NONE
END OF SEQUENCE:ACK RQ
CALL CH :70
SELECT WITH , INPUT NO., &
PRESS ENTER . PRESS CALL TO SEND.
PRESS STOP TO RETURN.
--INDIVIDUAL CALL EDIT--
CH70 25W
FORMAT :INDIVIDUAL
ADDRESS :368259417
CATEGORY :ROUTINE
TELECOMMAND1 :G3E SIMP TEL
TELECOMMAND2 :NO INFORMATION
WORK CH :NONE
END OF SEQUENCE:ACK RQ
CALL CH :70
SELECT WITH , & PRESS ENTER .
PRESS CALL TO SEND.
PRESS STOP TO RETURN.