48
OPERATION
4.1.3
Transmitting
Originate transmission on CH16, and switch to other channels later.
OPERATION
Press
OPE
.
MASTER appears for OPE in the CH16 Status
Display.
TIP
• When no remote controller is connected,
pressing
OPE
is not necessary because
MASTER automatically appears for OPE.
• A controller which does not have priority can be
used only when no other controller is in use
[OPE: OFF], by just pressing the
OPE
key.
When using the controller which has priority,
pick up the handset or press
OPE
to make a
call.
Pick up the handset.
Press PTT to transmit a request to
change to another channel.
As long as PTT is being pressed, TX appears at
OUTPUT on the display.
TIP
Press
25/1W
to change the transmission power.
ITU CH
16
MODE: SIMP TEL OUTPUT: 25W
OPE : MASTER ALARM : ENABLE
SCAN: OFF SQL : CLOSE
SP : ON POWER : AC
21 JUL 1994 14:59 UTC
S: 12°34’ W: 123°45’ U
4.1 Basic Communication (Telephone Mode)
JHS-32B
MARINE VHF RADIOTELEPHONE
ITU CH
16
MODE: SIMP TEL OUTPUT: 25W TX
OPE : MASTER ALARM : ENABLE
SCAN: OFF SQL : CLOSE
SP : ON POWER : AC
21 JUL 1994 14:59 UTC
S: 12°34’ W: 123°45’ U
Before transmitting, check that the channel is not in use. Try to make
communication time as brief as possible. Otherwise, you may impede the
communication of other stations.
CAUTION
To Next Page
Loading...