JRC JHS-32B - Page 57

1
2
3
4
5
6
7
8
9
10
49
OPERATION
Release PTT when transmission is
complete.
The unit returns to reception status.
Enter a channel number.
Example: Enter
2 0
to select CH20.
TIP
Refer to “4.2 Communicating using a Specified
Channel” when using a private or memory
channel.
Press PTT to transmit.
As long as PTT is being pressed, TX appears at
OUTPUT on the display.
Release PTT when transmission is
complete.
The unit returns to reception status.
ITU CH 16
MODE: SIMP TEL OUTPUT: 25W
OPE : MASTER ALARM : ENABLE
SCAN: OFF SQL : CLOSE
SP : ON POWER : AC
21 JUL 1994 14:59 UTC
S: 12°34’ W: 123°45’ U
ITU
CH 20
MODE: SEMI-DUP OUTPUT: 25W
OPE : MASTER ALARM : ENABLE
SCAN: OFF SQL : CLOSE
SP : ON POWER : AC
21 JUL 1994 14:59 UTC
S: 12°34’ W: 123°45’ U
ITU
CH 20
MODE: SEMI-DUP OUTPUT: 25W TX
OPE : MASTER ALARM : ENABLE
SCAN: OFF SQL : CLOSE
SP : ON POWER : AC
21 JUL 1994 14:59 UTC
S: 12°34’ W: 123°45’ U
ITU
CH 20
MODE: SEMI-DUP OUTPUT: 25W
OPE : MASTER ALARM : ENABLE
SCAN: OFF SQL : CLOSE
SP : ON POWER : AC
21 JUL 1994 14:59 UTC
S: 12°34’ W: 123°45’ U
4.1 Basic Communication (Telephone Mode)
MORE