JRC JHS-32B - Displaying Received Messages for Which an Acknowledgment Is Requested but no Work Channel Is Specified

100
OPERATION
4.3 Communicating in DSC (Digital Selective Call) Mode
(2) Displaying Received Messages for Which An Acknowledgment is
Requested but No Work Channel is Specified
OPERATION
An alarm sounds when a message
is received.
The MESSAGE RECEIVED Display appears and
the message is displayed.
TIP
• The controller automatically enters DSC mode
on CH70, the OTHERS ACKNOWLEDGE-
MENT CALL Display appears, and an acknowl-
edgment is automatically transmitted.
• When transmission is completed, TRANSMIT-
TED appears.
Press
STOP
.
The alarm stops.
TIP
When the controller in use has priority, the alarm
of the main unit and all remote controllers stop
when
STOP
is pressed, but if the controller in
use does not have priority, only the alarm of the
controller in use stops.
Press
STOP
after confirming or
recording the received message.
TIP
• Pressing
STOP
on a remote controller that has
priority returns to the CH16 Status Display, as
does pressing
STOP
on a remote controller in
use but which does not have priority.
• When OFF is displayed for OPE, press
OPE
to return to the CH16 Status Display.
• For any controller which does not have priority,
press
OPE
on the controller currently in use to
change OPE to OFF.
--MESSAGE RECEIVED--
CH16 25W
RECEIVED ON CH70,21.JUL.1994 14:40 UTC
FORMAT :INDIVIDUAL
ADDRESS :123456789
CATEGORY :ROUTINE
TELECOMMAND1 :G3E SIMP TEL
TELECOMMAND2 :NO INFORMATION
WORK CH :NONE
END OF SEQUENCE:ACK RQ
PRESS STOP FOR ALARM OFF.
--OTHERS ACKNOWLEDGEMENT CALL--
CH70 25W
RECEIVED ON CH70,21.JUL.1994 14:40 UTC
FORMAT :INDIVIDUAL
ADDRESS :123456789
CATEGORY :ROUTINE
TELECOMMAND1 :G3E SIMP TEL
TELECOMMAND2 :NO INFORMATION
WORK CH :NONE
END OF SEQUENCE:ACK BQ
CALL CH :70
TRANSMITTED
PRESS STOP FOR ALARM OFF.
--OTHERS ACKNOWLEDGEMENT CALL--
CH70 25W
RECEIVED ON CH70,21.JUL.1994 14:40 UTC
FORMAT :INDIVIDUAL
ADDRESS :123456789
CATEGORY :ROUTINE
TELECOMMAND1 :G3E SIMP TEL
TELECOMMAND2 :NO INFORMATION
WORK CH :NONE
END OF SEQUENCE:ACK BQ
CALL CH :70
TRANSMITTED
PRESS STOP AT PRIORITY UNIT TO RETURN.
ITU CH 16
MODE: SIMP TEL OUTPUT: 25W
OPE : MASTER ALARM : ENABLE
SCAN: OFF SQL : CLOSE
SP : ON POWER : AC
21 JUL 1994 14:59 UTC
U
ITU CH 16
MODE: SIMP TEL OUTPUT: 25W
OPE : MASTER ALARM : ENABLE
SCAN: OFF SQL : CLOSE
SP : ON POWER : AC
21 JUL 1994 14:59 UTC
S: 12°34’ W: 123°45’ U