EasyManua.ls Logo

JRC JHS-32B - Specifications; 8.1 Main Unit (JHS-32 B) General Specifications

JRC JHS-32B
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
2
3
4
5
6
7
8
9
10
125
SPECIFICATIONS
SPECIFICATIONS
Main Unit (JHS-32B)
General Specifications
Transmission frequency range 155.000 – 159.500 MHz
Reception frequency range 155.000 – 159.500 MHz (simplex)
160.600 – 163.500 MHz (semi-duplex)
Type approval frequency range 156.000 – 157.450 MHz (transmitting)
156.000 – 162.025 MHz (receiving)
Channel capacity ITU/ USA/ Canadian channels: 57 max.
Private channels: 99 max.
Memory channels: 10 max.
Weather channels (reception only): 9
Channel spacing 25kHz / 10kHz
Communication modes Simplex and semi-duplex
Type of emission G3E and G2B (F3E, F2B)
Frequency accuracy Within ± 10X10
-6
Antenna impedance 50 unbalanced
Main controls Transmitting and stopping distress signals, transmission and recep-
tion settings for specific channels, transmission power setting,
dimmer, squelch, volume
Main display items Telephone mode: Transmission and reception settings for specific
channels, operating mode and other operation conditions, date, time,
position
DSC mode: 9 lines X 40 characters for the message display and 4
lines X 40 characters for the error and instruction display
Rated power supply voltage 100 – 120VAC (50/60Hz) or 200 – 240VAC (50/60Hz), and 24VDC
(21.6 – 31.2VDC)
Current consumption 100VAC: When transmitting: 25W; 2A max. When receiving: 1A max.
220VAC: When transmitting: 25W; 1A max. When receiving: 0.5A
max. 24VDC: When transmitting: 25W; 5.5A max. When receiving:
1.5A max.
Power switching AC operation (default) with automatic switch to DC operation in case
of AC power failure.
Temperature range for full performance 0°C – +40°C
Operating temperature range –15°C – +55°C
Storage temperature range –25°C – +65°C
Humidity resistance No abnormality after standing 4 hours in +40°C, 93%RH
Vibration resistance 5 – 12.5Hz Full amplitude 3.2mm, 12.5 – 25Hz Full amplitude
0.8mm, 25 – 50Hz Full amplitude 0.2mm
No abnormality after vibrating for 15 minutes in each of the three axes.
Continuous operation No abnormality after operatring continuously for eight hours.
Dimensions and mass 290mm (H) X 240mm (W) X 145mm (D) (excluding projecting parts)
Approx.10.5kg
8.1 Main Unit (JHS-32B)
8.1

Table of Contents

Related product manuals