JRC JHS-32B - Setting Date and Time

1
2
3
4
5
6
7
8
9
10
111
OPERATION
4.3 Communicating in DSC (Digital Selective Call) Mode
4.3.18 Setting Date and Time
Date and Time can be set manually.
OPERATION
Press
MENU
.
The DSC MENU Display appears.
Select “12. DATE AND CLOCK
SETUP” using
/
.
“12. DATE AND CLOCK SETUP” is highlighted.
Press
ENTER
.
The DATE AND CLOCK SETUP Display ap-
pears and DATE is highlighted.
--DSC MENU--
CH70 25W
1.DISTRESS CALL EDIT
2.ALL SHIPS CALL EDIT
3.INDIVIDUAL CALL EDIT
4.AUTO/SEMI-AUTO TEL CALL EDIT
5.DISTRESS RELAY
6.DISTRESS ACKNOWLEDGEMENT
7.OTHERS ACKNOWLEDGEMENT
8.RECEIVED DISTRESS MESSAGE READOUT
9.RECEIVED OTHERS MESSAGE READOUT
SELECT WITH , & PRESS ENTER .
PRESS STOP TO RETURN.
--DSC MENU--
CH70 25W
7.OTHERS ACKNOWLEDGEMENT
8.RECEIVED DISTRESS MESSAGE READOUT
9.RECEIVED OTHERS MESSAGE READOUT
10.TEL NO. REGISTRATION
11.AUTO ACKNOWLEDGEMENT SETUP
12.DATE AND CLOCK SETUP
13.DSC SETUP CONFIRMATION
14.SELF TEST FOR USER
15.SELF TEST FOR MAINTENANCE
SELECT WITH , & PRESS ENTER .
PRESS STOP TO RETURN.
--DATE AND CLOCK SETUP--
CH70 25W
DATE :23.05.93 (DD.MM.YY)
CLOCK:15:58 UTC (HH:MM)
SELECT WITH , INPUT DATE, & PRESS
ENTER . PRESS CLR TO CORRECT.
PRESS STOP TO RETURN.
Be sure to use UTC time for the year, month, day, hour and minute settings.
However, when a navigation aid is connected, date and time data from the
navigation aid is displayed regardless of the manual settings.
CAUTION
MORE