JRC JHS-32B - 5.1.4 Self Test and DSC Operation Test

110
OPERATION
4.3 Communicating in DSC (Digital Selective Call) Mode
Press
ENTER
.
The AUTO ACKNOWLEDGEMENT SETUP
Display appears and the current setting is
highlighted.
Select ON or OFF using
/
.
ON : Messages acknowledged automatically.
OFF : Messages must be acknowledged manu-
ally.
Press
STOP
to return to the DSC
MENU Display.
The AUTO ACKNOWLEDGEMENT SETUP
Display disappears and the DSC MENU Display
appears.
Press
STOP
to return to the CH16
Status Display.
The CH16 Status Display returns.
TIP
For any controller which does not have priority,
press
OPE
on the controller currently in use to
change OPE to OFF.
--AUTO ACKNOWLEDGEMENT SETUP--
CH70 25W
AUTO ACKNOWLEDGEMENT:ON/OFF
SELECT WITH .
PRESS STOP TO RETURN.
ITU CH 16
MODE: SIMP TEL OUTPUT: 25W
OPE : MASTER ALARM : ENABLE
SCAN: OFF SQL : CLOSE
SP : ON POWER : AC
21 JUL 1994 14:59 UTC
U
ITU CH 16
MODE: SIMP TEL OUTPUT: 25W
OPE : MASTER ALARM : ENABLE
SCAN: OFF SQL : CLOSE
SP : ON POWER : AC
21 JUL 1994 14:59 UTC
S: 12°34’ W: 123°45’ U
--DSC MENU--
CH70 25W
1.DISTRESS CALL EDIT
2.ALL SHIPS CALL EDIT
3.INDIVIDUAL CALL EDIT
4.AUTO/SEMI-AUTO TEL CALL EDIT
5.DISTRESS RELAY
6.DISTRESS ACKNOWLEDGEMENT
7.OTHERS ACKNOWLEDGEMENT
8.RECEIVED DISTRESS MESSAGE READOUT
9.RECEIVED OTHERS MESSAGE READOUT
SELECT WITH , & PRESS ENTER .
PRESS STOP TO RETURN.
--AUTO ACKNOWLEDGEMENT SETUP--
CH70 25W
AUTO ACKNOWLEDGEMENT:ON/OFF
SELECT WITH .
PRESS STOP TO RETURN.