90
OPERATION
4.3 Communicating in DSC (Digital Selective Call) Mode
4.3.11
A connection to a public telephone subscribers in semi-automatic or automatic mode can be obtained
using DSC.
OPERATION
Press
MENU
.
The DSC MENU Display appears.
Select “4. AUTO/SEMI-AUTO TEL
CALL EDIT” using
/
.
“4. AUTO / SEMI-AUTO TEL CALL EDIT” is
highlighted.
Press
ENTER
.
The AUTO / SEMI-AUTO TEL CALL EDIT
Display appears and ADDRESS is highlighted.
TIP
FORMAT is fixed as AUTO / SEMI-AUTO
SERVICE and cannot be edited.
Enter the ID number of the coastal
station and press
ENTER
.
CATEGORY is highlighted.
TIP
Make the ADDRESS the ID number of the
coastal station that will make the connection to
the public telephone subscriber.
Requesting a Connection to a Public
Telephone Subscribers
--DSC MENU--
CH70 25W
1.DISTRESS CALL EDIT
2.ALL SHIPS CALL EDIT
3.INDIVIDUAL CALL EDIT
4.AUTO/SEMI-AUTO TEL CALL EDIT
5.DISTRESS RELAY
6.DISTRESS ACKNOWLEDGEMENT
7.OTHERS ACKNOWLEDGEMENT
8.RECEIVED DISTRESS MESSAGE READOUT
9.RECEIVED OTHERS MESSAGE READOUT
SELECT WITH , & PRESS ENTER .
PRESS STOP TO RETURN.
--DSC MENU--
CH70 25W
1.DISTRESS CALL EDIT
2.ALL SHIPS CALL EDIT
3.INDIVIDUAL CALL EDIT
4.AUTO/SEMI-AUTO TEL CALL EDIT
5.DISTRESS RELAY
6.DISTRESS ACKNOWLEDGEMENT
7.OTHERS ACKNOWLEDGEMENT
8.RECEIVED DISTRESS MESSAGE READOUT
9.RECEIVED OTHERS MESSAGE READOUT
SELECT WITH , & PRESS ENTER .
PRESS STOP TO RETURN.
--AUTO/SEMI-AUTO TEL CALL EDIT--
CH70 25W
FORMAT :AUTO/SEMI-AUTO SERVICE
ADDRESS :000000000
CATEGORY :ROUTINE
TELECOMMAND1 :G3E DUP TEL
TELECOMMAND2 :NO INFORMATION
WORK CH :NONE
TELEPHONE NO. :
END OF SEQUENCE:ACK RQ
CALL CH :70
SELECT WITH , INPUT NO., &
PRESS ENTER . PRESS CALL TO SEND.
PRESS STOP TO RETURN.
--AUTO/SEMI-AUTO TEL CALL EDIT--
CH70 25W
FORMAT :AUTO/SEMI-AUTO SERVICE
ADDRESS :001234567
CATEGORY :ROUTINE
TELECOMMAND1 :G3E DUP TEL
TELECOMMAND2 :NO INFORMATION
WORK CH :NONE
TELEPHONE NO. :
END OF SEQUENCE:ACK RQ
CALL CH :70
SELECT WITH , & PRESS ENTER .
PRESS CALL TO SEND.
PRESS STOP TO RETURN.
To Next Page
Loading...