JRC JHS-32B - 8.3 Options

1
2
3
4
5
6
7
8
9
10
129
SPECIFICATIONS
(4) Weather Channels
CH RX(MHz) CH RX(MHz) CH RX(MHz)
W1 162.550 W4 161.650 W7 162.500
W2 162.400 W5 162.425 W8 162.525
W3 162.475 W6 162.450 W9 161.775
(5) Private Channels
Up to 99 channels can be registered between 155.000MHz and 159.500MHz in 10kHz or 25kHz steps
(simplex), 155.000MHz and 159.500MHz (semi-duplex TX), or 160.600MHz and 163.500MHz (semi-
duplex RX) depending on factory settings.
Please specify frequencies when ordering.
If additional frequencies are required after the unit has been shipped, contact JRC or a local JRC
agent.
Press
P
to display the Private Channel list, which shows all currently registered frequencies.
When the transmission and reception frequencies differ, the unit will operate in semi-duplex mode.
A frequency outside the specified frequency range or not specified in steps of 25kHz or 10kHz cannot
be registered.
Options
(1) NCH-414 Remote Controller
Operation and displays Same as the JHS-32B main unit
Power supply, current 100V-120VAC (50/60Hz), 1A or less, or 200V-240VAC (50/60Hz),
0.5A or less, and 24VDC (21.6-31.2VDC), 1A or less.
Input switching AC is the default, automatically switching to DC in case of AC power
failure.
Ambient conditions Same as the JHS-32B main unit
Dimensions 290mm (H) X 240mm (W) X 80mm (D) (excluding projecting parts)
Mass Approx. 5kg
(2) NKG-52 Printer
Printing system Thermal type serial dot printer
Input interface Convenient Centronics type
Input data 8-bit parallel
Character format 7 X 5 dot matrix
Printer paper 5ZPMB00001, 80mm wide thermal paper
Power supply 5VDC, 3W or less, supplied from JHS-32B
Dimensions 145mm (H) X 140mm (W) X 145mm (D) (excluding projecting parts)
Mass Approx. 1.5kg
8.3
8.2 Channel Assignment Tables / 8.3 Options
TIP