JRC JHS-32B - Page 112

104
OPERATION
4.3 Communicating in DSC (Digital Selective Call) Mode
Select a received message using
/
.
• This feature allows the user to view stored
messages.
• In the example, Message No.02 is selected.
TIP
• Each time
is pressed, the displayed
message cycles one step backwards in time
from the newest message, stopping when the
oldest message is reached:
No. 01 ➞ No. 02 ➞ • • • ➞ oldest message
• Each time
is pressed, the displayed
message cycles one step forwards in time from
the oldest message, stopping when the newest
message is reached:
Oldest message No. ➞ • • • ➞ No. 01
Press
STOP
to return to the DSC
MENU Display.
The RECEIVED DISTRESS MESSAGE NO.02
Display disappears and the DSC MENU Display
appears.
Press
STOP
to return to the CH16
Status Display.
The CH16 Status Display returns.
TIP
For any controller which does not have priority,
press
OPE
on the controller currently in use to
change OPE to OFF.
--RECEIVED DISTRESS MESSAGE NO.02--
CH70 25W
RECEIVED ON CH70,20.JUL.1994 17:45 UTC
FORMAT :DISTRESS
ADDRESS :111111111
NATURE OF DIST :FIRE
DIST-POSITION :S05.25 W132.50
DIST-UTC :20:30
TELECOMMAND :G3E SIMP TEL
END OF SEQUENCE:EOS
PRESS TO SELECT MSG.
PRESS STOP TO RETURN.
ITU CH 16
MODE: SIMP TEL OUTPUT: 25W
OPE : MASTER ALARM : ENABLE
SCAN: OFF SQL : CLOSE
SP : ON POWER : AC
21 JUL 1994 14:59 UTC
U
ITU CH 16
MODE: SIMP TEL OUTPUT: 25W
OPE : MASTER ALARM : ENABLE
SCAN: OFF SQL : CLOSE
SP : ON POWER : AC
21 JUL 1994 14:59 UTC
S: 12°34’ W: 123°45’ U
--DSC MENU--
CH70 25W
1.DISTRESS CALL EDIT
2.ALL SHIPS CALL EDIT
3.INDIVIDUAL CALL EDIT
4.AUTO/SEMI-AUTO TEL CALL EDIT
5.DISTRESS RELAY
6.DISTRESS ACKNOWLEDGEMENT
7.OTHERS ACKNOWLEDGEMENT
8.RECEIVED DISTRESS MESSAGE READOUT
9.RECEIVED OTHERS MESSAGE READOUT
SELECT WITH , & PRESS ENTER .
PRESS STOP TO RETURN.