JRC JHS-32B - Page 60

52
OPERATION
Press
P
.
The PRIVATE CHANNEL Display appears.
Select a private channel using
/
.
The selected private channel is highlighted.
TIP
• Simply enter the 2-digit private channel number
(i.e.
0 3
) to select a private channel.
• There can be up to 99 private channels, but only
the first 9 are displayed. To scroll through the
other channels, use
/
.
Press
ENTER
.
The Status Display of the selected channel (e.g.
CH P03) appears.
Start the transmission.
Press PTT to transmit.
Hang up the handset to terminate
communication.
The CH16 Status Display returns and OFF
appears for OPE.
TIP
When no remote controllers are connected,
MASTER remains for OPE.
--PRIVATE CH--
CH16 25W
01. TX:156.500MHz RX:156.500MHz
02. TX:155.500MHz RX:155.500MHz
03. TX:159.210MHz RX:159.210MHz
04. TX:157.930MHz RX:161.930MHz
05. TX: RX:
06. TX: RX:
07. TX: RX:
08. TX: RX:
09. TX: RX:
INPUT NO., OR SELECT WITH , &
PRESS ENTER .
PRESS STOP TO RETURN.
CH P03
MODE: SIMP TEL OUTPUT: 25W
OPE : MASTER ALARM : ENABLE
SCAN: OFF SQL : CLOSE
SP : ON POWER : AC
21 JUL 1994 14:59 UTC
S: 12°34’ W: 123°45’ U
JHS-32B
MARINE VHF RADIOTELEPHONE
4.2 Communicating Using a Specified Channel
--PRIVATE CH--
CH16 25W
01. TX:156.500MHz RX:156.500MHz
02. TX:155.500MHz RX:155.500MHz
03. TX:159.210MHz RX:159.210MHz
04. TX:157.930MHz RX:161.930MHz
05. TX: RX:
06. TX: RX:
07. TX: RX:
08. TX: RX:
09. TX: RX:
INPUT NO., OR SELECT WITH , &
PRESS ENTER .
PRESS STOP TO RETURN.