JRC JHS-32B - 4.3.9 Calling a Specific Station

74
OPERATION
4.3 Communicating in DSC (Digital Selective Call) Mode
Select DISTRESS using
/
.
Press
ENTER
.
The window closes and TELECOMMAND1 is
highlighted.
Press or .
• The TELECOMMAND1 window opens.
• The window contains the following four items:
DISTRESS RELAY
DISTRESS ACK
G3E SIMP TEL
G3E DUP TEL
However, when items other than DISTRESS are
selected in step 5, only G3E SIMP TEL and G3E
DUP TEL are contained in the window.
TIP
Press
/
, or
CLR
to go back to step 6.
Select DISTRESS RELAY using
/
.
--ALL SHIPS CALL EDIT--
CH70 25W
FORMAT
CATEGORY DISTRESS
TELECOMMAND1 URGENCY
DIST-ID SAFETY
NATURE OF DIST ROUTINE
DIST-POSITION SHIP'S BUSINESS
DIST-UTC
TELECOMMAND
END OF SEQUENCE
SELECT WITH , & PRESS ENTER .
PRESS CLR TO CANCEL.
--ALL SHIPS CALL EDIT--
CH70 25W
FORMAT :ALL SHIPS
CATEGORY :DISTRESS
TELECOMMAND1 :G3E SIMP TEL
DIST-ID :000000000
NATURE OF DIST :UNDESIGNATED DISTRESS
DIST-POSITION :99.99 999.99
DIST-UTC :88:88
TELECOMMAND :G3E SIMP TEL
END OF SEQUENCE:EOS
SELECT WITH , & PRESS ENTER .
PRESS CALL TO SEND.
PRESS STOP TO RETURN.
--ALL SHIPS CALL EDIT--
CH70 25W
FORMAT
CATEGORY DISTRESS RELAY
TELECOMMAND1 DISTRESS ACK
DIST-ID G3E SIMP TEL
NATURE OF DIST G3E DUP TEL
DIST-POSITION
DIST-UTC
TELECOMMAND
END OF SEQUENCE
SELECT WITH , & PRESS ENTER .
PRESS CLR TO CANCEL.
--ALL SHIPS CALL EDIT--
CH70 25W
FORMAT
CATEGORY DISTRESS RELAY
TELECOMMAND1 DISTRESS ACK
DIST-ID G3E SIMP TEL
NATURE OF DIST G3E DUP TEL
DIST-POSITION
DIST-UTC
TELECOMMAND
END OF SEQUENCE
SELECT WITH , & PRESS ENTER .
PRESS CLR TO CANCEL.