4
4.14 LANGUAGE SETTING (LANGUAGE)
The system is designed to switch between display languages, Japanese and English.
Procedures 1. Open the Serviceman Menu.
2. Perform the following menu open procedure to open the language
setting menu.
2. Installation Menu
→ 8. Language
3. Select the language to be used.
1. English
2. Japanese
3. Other
3. Other is an option to display character strings created by our agents.
Ask the agent or our sales department if your language is supported.
4. To determine the selected language, turn the radar off, and then turn it
on.
4.15 DATE TIME SETTING
To display time, the local time, local date, and time-zone difference must be set.
However, if the "ZDA" sentence of NMEA0183 is receive
d, tim
e can be automatically displayed.
Procedures 1. Press the [RADAR MENU] key twice, and then perform the following
menu open procedure to open the Date/Time Setting menu.
5. Sub Menu
→ 6. Date/Time Setting
2. Set information about date and time.
[1] UTC/LMT (Time display system)
UTC: Universal Time Coordinate
LMT: Local Mean Time
[2] LMT Date
Input the date in local time.
[3] LMT Time
Input the time in local time.
[4] Time Zone
Input the time-zone difference between the universal time and local time.
4-16
To Next Page
Loading...
